Instructions / Assembly

Issued/Revised: 03/04/14
7'-6" UPRIGHT w/CAP, CLAMP, & FOOTER 02-07-5075
uPLAY TODAY
800.458.5872
www.ultraplay.com
1
Parts List
PART NUMBER
QTYDESCRIPTION
02-07-019713 1/2" UPRIGHT, 7'-6" LG.
02-07-00421
UPRIGHT FOOTER
33-12-00261
33-11-0011*
2
M10 x 80mm (3 1/8") BHCS BOLT
33-11-0401*
2M10 BARREL NUT
HARDWARE COMPLETE
Items listed below Hardware Complete line are included with Hardware Complete Number
Warning: During Installation, Hardware And Small Parts Are Choking Hazards For Young Children. Store
Unused Parts Appropriately Until Assembly Is Completed. Once Assembly Is Completed, Remove Any
Unused Parts From The Play Environment And Dispose/Save Them In A Secure Location. Any bolt end
protruding more than two full threads beyond the face of the nut causes risk of clothing entanglement.
Promptly cut-off flush, file smooth, and treat to prevent corrosion.
Unless Otherwise Specified, All Units of Measure are Each
Note: Peen Tee-Nuts and Flatwashers to match radius of pipe after assembly is complete.
Note: Loctite (supplied by others) should be used on any non-patch hardware.
INSTALLATION INSTRUCTIONS:
IMPORTANT:
DETERMINE WHICH MOUNTING OPTION YOU ARE USING; SURFACE MOUNT, ONGROUND, OR IN-GROUND.
1. Locate Uprights and Upright Footers to choose appropriate holes in Upright Footer depending on your surfacing application.
NOTE:
USE TOP (2) HOLES FOR 12" ENGINEERED WOOD FIBER. USE BOTTOM (2) HOLES FOR 2" POURED-IN-PLACE OR
RUBBER TILES.
2. Attach Upright Footer to Upright using M10 x 80mm B.H.C.S. and M10 Barrel Nut. See Detail 063.
NOTE:
HEAD OF BOLT IS INSERTED THROUGH THE LARGE HOLE IN UPRIGHT.
3. Plumb and level entire assembly before tightening all fasteners. NOTE: Apply Loctite to threads of Bolt to prevent from loosening.
MAINTENANCE PROCEDURE:
Periodically check hardware for tightness, and tighten as necessary. Always check all parts for breakage or wear, and immediately
put equipment out of service until any faulty parts found are repaired or replaced. Also Check all metal parts for rust, paint loss and
touch-up if necessary with paint. Check for welded areas and verify integrity. Check periodically resilient surfacing for appropriate
depth and remove extraneous materials that could cause injury, infection, or disease. Maintain detailed installation, inspection,
maintenance, and repair records for each public-use playground equipment.