4-POST UTILITY TRUCK RACK Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ultra-Tow product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This 4-Post Utility Truck Rack is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Considerations ........................................................................................................ 5 Safety Labels .........................................
Intended Use This unique truck rack transports anything from construction materials and ladders to kayaks and more! Technical Specifications Property Length Width Height Maximum Weight Capacity Specification 80in. 14.8in. 36in. 800 lbs. Read and understand all instructions. Failure to follow all instructions may result in serious injury. The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur.
Important Safety Considerations DO NOT modify the product in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the product was designed. Use the right tool for the job. DO NOT attempt to force a small equipment to do the work of larger industrial equipment. There are certain applications for which this equipment was designed.
RACK USE AND CARE Do not over fill the rack. Racks do a better and safer job when used in the manner for which they are designed. Plan your work, and do not overload. Check for damaged parts before each use. Carefully check that the rack will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never load the rack with a damaged part. Do not let children play with or around the rack. It is not a toy.
Assembly Recommended Tools Open Wrench（2pc） Open Wrench（2pc） Size=13mm Size=18mm Open Wrench（2pc） Size=24mm Step 1 - Refer to Fig. 1 Slide a Mounting Sleeve (6) onto Cross Bar (4). Insert a Triangular Stop (5) into the Mounting Sleeve (6), and secure it with Bolt Set A. Repeat for the other three Triangular Stops (5).
Step 2 - Refer to Fig. 2 Line up the bottom holes in Upstand (3) with the upright holes in Mounting Feet (1), and secure with Bolt Set B. Repeat for the other Posts and Mounting Foot. Place the Upstands/Mounting Feet assembly onto the side rail of the truck bed with the lip of the Mounting Feet flush with the inside of the side rail. Secure with J-Hook (7) through the holes in the Mounting Feet (1), and secure with Bolt Set C. Repeat for other three Mounting Feet. Step 3 - Refer to Fig.
Parts Diagram Parts List Item# Description Quantity 1 Mounting Feet A 2 2 Mounting Feet B 2 3 Upstand 4 4 Cross Bar 2 5 Triangular Stop 4 6 Mounting Sleeve 4 7 J Hook 8 Page 9 of 12
Hardware List Bolt Sets Description Pic Quantity M8*25 Bolt; M8 Washer; A 8 M8 Spring Washer;M8 Nut M16*85 Bolt;M16 Washer; B 8 M16 Washer; M16 Spring Washer;M16 Lock nut M12 Spring Washer; C 8 M12 Washer; M12 nut M12*55 Bolt;M12 Washer; D 4 M12 Lock nut Page 10 of 12
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following will be required: Model Number, Serial Number/Lot Date Code, and Description.
Distributed by Northern Tool and Equipment Company, Inc. Burnsville, Minnesota 55306 NorthernTool.
