Instructions / Assembly

ENGLISH

NOTE: there is no general rule for wear. Rollerblade

suggests replacing the wheels well before

the urethane is worn down or if starts to break up. Replace all the wheels at the same time.

Rollerblade

also recommends applying one small drop of blue (removable) thread-lock to

the axle threads every time you change the wheels. Rollerblade

offers two different types

of axles. The first axle - Visual instruction (18) consists of a short bolt that inserts

into a long bolt. The second axle - Visual instruction (19) is specifically designed for high

performance aluminum extruded race frames and bolts directly into the frame.

How to rotate wheels - Visual instruction (20).

How to rotate wheels on skates with different wheel sizes - Visual instruction (21).

TO REMOVE WHEELS

1. Unscrew with Allen key #4 (included in box) - Visual instruction (22).

2. Remove axle.

TO ASSEMBLE WHEELS

1. Reinsert axle.

2. Re-tighten bolt securely - Visual instruction (23). Refer to the tightening torques

indicated on the drawing - Visual instruction (23).

Rollerblade

recommends applying blue (removable) thread-lock to the axle threads

every time you change the axles and bolts.

BEARINGS .........................................................................................

For longer life, your bearings should be properly cleaned and lubricated.

BEARING CLEANING

1. Remove all 4 wheels with supplied Allen Key #4.

2. Wipe off the dirt and debris from the wheels and bearings with a rag.

3. Clean off axles.

4. Clean the inside of the frame with a rag.

5. If the bearings aren’t spinning freely, apply 2 small drops of bearing lube. Most bike

chain lubes work well - Visual instruction (24).

6. If bearings are not spinning freely, replace bearings as needed.

7. Replace wheels back into the frame.

8. Use one small drop of blue (removable) thread lock on the male axle threads.

9. Install and tighten axles.

FRAMES..............................................................................................

FRAME ADJUSTMENT (Selected models only)

On specific Rollerblade

models, you can adjust the position of the frame to customize the

skates for your personal skating style. To determine if your frame position is adjustable,

please check with your local authorized Rollerblade

dealer or visit www.rollerblade.

com. If your frame is adjustable, you can align the frame towards the outside for easier

push off initiation or align the frame towards the inside for more precise edging and lateral

energy transmission.