Datasheet

TM
HCAs
ELECTRICAL AND ENVIRONMENTAL CHARACTERISTICS / DATA
100
120
80
40
0
40 80 120 160 200 240 275
Rated Power [%]
Ambient Temperature [°C]
DERATING CURVE
70°C
TOLERANCE
RESISTANCE VALUE
HTR TYPE
SERIES
HCAS R10 HC2S
ORDERING INFORMATION
C3S
C2S
SURFACE MOUNT RESISTORS
CERAMIC ENCASED TYPE
Performance Requirements
Test
Resistance tolerance +10% [K]; +5% [J]; +3% [H];
+2% [G] +1% [F]
Ambient operating temperature range -55°C to +155°C
full power at 70°C
Insulation resistance >1000 Mega Ohm
Thermal shock Max DR +[0.5% + R05]
Short time overload Max DR +[2% + R05]
Dielectric withstanding voltage Max DR +[2% + R05]
Load life Max DR +[5.0% + R05]
Temperature co-efficient +100 ppm/ °C [>10R]
of resistance +80 ppm/ °C [<10R]
+450 ppm/ °C [<1R0]
Flame test Specification laid down by UL
have been met satisfactorily
TEMPERATURE RISE CURVE
Temperature rise in °C
0.5 1.0 1.5 2.0 2.5 3.0 0
50
100
150
200
Power in watts
C3S
C2S
60
20
Note : Due to recent technological advances, the ceramic cases used may be steatite ceramic or corderite
ceramic or high alumina ceramic depending on the nature of the application. Hence the ceramic cases may be
off-white or variations of brown and variations of grey; colours which are inherent to these ceramic materials.