SDS

SAFETY DATA SHEET
ZEP FRESHEN DISINFECTANT SPRAY MIST
Version 1.0
Revision Date 05/08/2020
Print Date 09/22/2020
4 / 12
Environmental precautions
:
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains, inform
respective authorities.
Methods and materials for
containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Sweep up or vacuum up spillage and collect in suitable
container for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
Do not breathe vapours/dust.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Take precautionary measures against static discharges.
Provide sufficient air exchange and/or exhaust in work rooms.
Dispose of rinse water in accordance with local and national
regulations.
Always replace cap after use.
Conditions for safe storage
:
BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
No smoking.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
Oxidizing agents
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
ethanol
64-17-5
TWA
1,000 ppm
ACGIH
TWA
1,000 ppm
1,900 mg/m3
NIOSH REL
TWA
1,000 ppm
1,900 mg/m3
OSHA Z-1
TWA
1,000 ppm
1,900 mg/m3
OSHA P0
STEL
1,000 ppm
ACGIH
PEL
1,000 ppm
1,900 mg/m3
CAL PEL