Installation Guide

idh

by St. Simons, Inc.

Professional Grade Quality Solid Brass Decorative Hardware & Bath Accessories

Demand Quality, Demand idh

idhbrass.com

Installation Instructions

Professional Grade Quality Solid Brass

2” Surface Bolt

Item# 11042

Dimensions:

 Length: 2”

 Width: 5/8”

 Throw: 7/16”

 Projection: 3/4” (base to top of knob)

 Net Weight: 1.50 oz.

 Gross Weight: 2 oz.

 Solid Brass Wood Screws

Dimensions are for reference use only.

For exact dimensions, please measure actual part.

Finish shown above in Antique Copper (08A)

Installation Instructions:

1. Position in desired position with edge of door.

2. Expose bottom screw hole by sliding bolt to up.

3. Mark position and drill 1/16” pilot hole 3/4” deep and

secure with screw provided.

4. Same process for the top screw hole.

5. Position strike with bolt, trace and mortise 1/8” deep

and drill 3/4” strike hole about 1” deep.

6. Re-align strike and drill 1/16” pilot holes 3/4” deep and

secure with screws provided.

7. Align strike plate; mark position and drill 1/16” pilot

hole 3/4” deep and secure with screws provided.

Catalog Section: B

2” Surface Bolt

Item# 11042

Date: Rev 04/18

PAGE 1
idh Demand Quality, Demand idh by St. Simons, Inc. idhbrass.com Professional Grade Quality Solid Brass Decorative Hardware & Bath Accessories Installation Instructions Professional Grade Quality Solid Brass 2” Surface Bolt Item# 11042 Dimensions:  Length: 2”  Width: 5/8”  Throw: 7/16”  Projection: 3/4” (base to top of knob)  Net Weight: 1.50 oz.  Gross Weight: 2 oz.  Solid Brass Wood Screws Dimensions are for reference use only. For exact dimensions, please measure actual part.