Installation Guide

by St. Simons, Inc.
Quality Solid Brass Decorative Hardware & Bath Accessories
“The Special Finishes Specialist” 
idhbrass.com
Installation Instructions
Premium Grade Solid Brass
4-1/2” Projection Square Kickdown Stop
Item# 13100
Dimensions:
• Arm Length: 4-1/2”
• Overall Projection: 4-3/4”
• Weight: 9 oz.
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
Installation Instructions:
1. Engage the kickstop so that the rubber tip would be flat
on the floor and the base would be flat on the door.
2. Position stop near outer edge of door with rubber foot
flat on floor.
3. Mark and drill pilot holes.
4. Secure the door stop into the wall using a screw driver.
Catalog Section: D
4-1/2” Projection Square Kickdown Stop
Item# 13100
Date: Rev 02/18