Datasheet
NANJING AH ELECTRONIC SCIENCE & TECHNOLOGY CO.,LTD
ADD:Room901, BLDG 1, CNK Mansion, 198, HongWu Road, Nanjing, 210002
TEL:86-25-68976263 FAX:86-25-68976999
E-mail:nianrong@ahest.com Web: www.ahest.com
AH31 Series Hall sensor is one of uniplar excitation single-ended digital output Hall IC. The
sensor chip has built-in reverse voltage protection voltage regulators, temperature compensation
circuit, Hall-voltage generator, signal amplifier, Schmitt trigger and open collector output drivers
and so on. Excellent performance of the voltage regulator and temperature compensation circuits,
ensure the sensor stable operated over a wide voltage range and temperature range, the reverse
voltage protection circuit avoids the sensor being reverse voltage damage.
Unipolar switch type Hall effect Sensor magnet and electric transfer characteristic::
◆ When the S pole of magnet faces the mark surface of the sensor and is closed to sensor
(B≥B
op
),the sensor outputs low level; When the magnet is far away from sensor (B≤B
rp
) ,
the sensor outputs high level. When the N pole faces the mark surface of the sensor, it is no
response. Stable Hysteresis(B
h
= Bop-- Brp)ensures stable sensor’s switch status. The sensor’s
magnet and electric transfer characteristic curve is shown as the figure:
AH31 Series Unipolar Digital Hall Effect Sensor
◆ Outline
◆ Magnetic and electric transfer characteristic
+B
Brp
Bop
0
VoL
Vcc
Vo
Bh