FAQ

DECORATIVE WOOD LATTICE SCREENS

FREQUENTLY ASKED QUESTIONS

2801 E. Beltline NE, Grand Rapids, MI 49525 800.598.9663 (WOOD) 4/19

UFPI.com

What are the most important things to know about framing?

• Get a professional look and protect exposed lattice edges with H-channel divider moulding and

C-channel cap moulding. Measure approximately 1” of extra C-channel cap moulding for each miter

joint. Use a miter box and hand saw to ensure all corner cuts are precisely 45 degrees for a clean,

tight joint.

• Drill small pilot holes near the edges of the lattice wherever screws are needed. This will ensure that

neither the moulding nor the lattice splits.

• Secure cap and divider mouldings to lattice with 1-5/8” rust-resistant, galvanized screws at each

miter joint.

• (CONT.)