Instructions / Assembly

Attach each 2" top rail bracket with four #10 x 2"

square drive screws (Fig. 6). Attach each bottom

rail bracket with four #10 x 1

⁄2

" screws.

Pre-drill one

⁄8

" diameter hole through top rail and

aluminum insert for each side of top rail brackets

only. Fasten with #10 x 1" at head square drive

screws (Fig. 7).

Add two screw covers for both top and bottom

brackets and add two screw caps for each top rail

bracket (Fig. 8).

Repeat installation process for each additional

rail assembly.

Fig. 6

Fig. 7

Fig. 8

Cover

Cap