Instructions / Assembly
VINYL STAIR RAILING
Place assembled stair rail section adjacent to the
mounted stair posts (Fig. 1). Measure the distance
from the rst and last baluster to the top and
bottom posts making sure distance is equal on both
sides of stair rail section (Fig. 2). Clamp into place
(Fig. 3).
NOTE:
Some installations may require longer stair posts.
Trace the post onto each rail (both ends of top and
bottom rails). Make four marks in total (Fig. 4).
Equal Spacing
Fig. 1
Fig. 2
Fig. 3
Fig. 4
6
1.
2.