Instructions / Assembly

Redwood&Horizontal&Fence&Panel&&
Installation/Assembly&Guidelines&
&
&
1.! Dig&the&first&post&hole&2&feet&deep.&
2.! Set&post&for&the&first&fence&panel&section.&
3.! Attach&one&side&of&the&fence&panel&to&the&post&with&2E1/4”&stainless&steel&screws.&&Three&
screws&are&recommended:&one&placed&12”&from&the&top&of&the&panel,&one&place&12”&from&
the&bottom&of&the&panel,&one&placed&in&the&middle.&
4.! Set&the&second&post&on&the&other&side&of&the&fence&panel&section.&
5.! Attach&the&second& post&to&the&other&side&of&the&fence&panel&with&2E1/4”&stainless&steel&
screws.&Three&screws&are&recommended:&one&placed&12”&from&the&top&of&the&panel,&one&
place&12”&from&the&bottom&of&the&panel,&one&placed&in&the&middle.&
6.! Repeat&steps&3&through&5&as&needed.&&
&