User manual

English
Intended Use
The BikeLogger C is designed to capture the journey data of all bicycles with a hub dynamo. Make sure your
bicycle’s safety is not affected in any way by the installation of the BikeLogger. For professional installation, we
recommend to seek help from a specialist or your bicycle dealer.
Installation
The BikeLogger C is designed to fit inside your bicycles suspension
fork, but can also be mounted onto another location. Attach the
BikeLogger, as seen in the picture, between hub dynamo and
frontlight. The BikeLogger has to jut a least 1 cm off the head tube.
Getting Started
Connect your Smartphone
5. Install the BikeLogger app – available to find in your personal App Store.
6. Make sure your smartphone’s Bluetooth
®
is switched on.
7. Give your front-wheel a good spin to enable the BikeLogger. The device has been activated once the
LED lights up blue.
8. Connect your Bikelogger by selecting “Preferences > Pair BikeLogger“ in your app.
Calibration
1. Select “Preferences > Calibrate BikeLogger“ in your BikeLogger app, and follow the instructions
provided.
2. To calibrate ‘Temperature’, select “Preferences > Calibrate Temperature“, and follow the instructions
provided.
Features
View your journey
 To view the default screen, choose “Start“ in your BikeLogger app, or simply spin your front-wheel.
 Please note the following indicators for displaying information during your active journey:
o Red needle: active speed
o Orange needle: average speed (of active
journey)
o Analogue clock: active time
o Digital display (inside the analogue clock):
length (of active journey)
o Cadence
o Length (of active journey)
o total kilometre
o Bluetooth
®
-Status: Blue = connected,
White = no connection
o active outside temperature
View historical data
 Select “History“ in your BikeLogger app.
 Speed, time and other parameters are diagrammed.
Anti-Theft Alarm
 Swipe the default screen leftward to navigate to the Anti-Theft mode.
 The BikeLogger will now notify you of any movement of your wheel, for approximately 30 minutes.
LED flashing sequence
Ready to connect
Connected
Ready to connect, Maintenance required
Connected, Maintenance required
Red flashing: time not preset - please load your Smartphone’s BikeLogger app.