Instructions / Assembly

9
Assembly — Hanging the Fan (continued)
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
3a
Making the electrical
connections
WARNING: Check to see that all connections are tight,
including ground, and that no bare wire is visible at the wire
nuts (except for the ground wire).
WARNING: To reduce the risk of re or electric shock, do
not use this fan with any solid-state speed control device.
WARNING: To avoid possible electrical shock, be sure
electricity is turned off at the main fuse box before wiring.
If you feel you do not have enough electrical wiring
knowledge or experience, have your fan installed by a
licensed electrician.
Follow the steps below to connect the fan to your household
wiring. Use the plastic wire nuts (BB) with your fan. Secure
the plastic wire nuts (BB) with electrical tape. Make sure there
are no loose strands or connections.
□ Make wire connections as follows, using the wire nuts
(BB).
From Fan To Outlet Box
Black + Blue Wires ---------- Black Wire (Hot)
White Wire ------------------- White Wire (Neutral)
Green Wires* ----------------- Green or Bare Wire (Ground)
* There are two green grounding leads: one from the mounting
plate (A) and one from the mounting bar (MM).
□ Turn the wire nut connections upward, spreading them
apart so the green (ground) and white wires will be on
one side of the outlet box (KK) and the black and blue
wires will be on the other side. Carefully tuck the
connections up into the outlet box (KK).
BB
NeutralHot
Black
Ground
conductor
White
Blue
Black
Green
White
KK
A
MM