SDS

SAFETY DATA SHEET
Innogel B450
according to Regulation (EC) No 1907/2006
Revision No: 1,00 Last modified on: 05/12/2018 Page 8 of 8
SECTION 16: Other information
Abbreviations and acronyms
ADR: Accord européen sur le transport des marchandises dangereuses par Route
(European Agreement concerning the International Carriage of Dangerous Goods by Road )
IMDG: International Maritime Code for Dangerous Goods
IATA: International Air Transport Association
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service
LC50: Lethal concentration, 50%
LD50: Lethal dose, 50%
Process categories according to ECHA guidance on information requirements and chemical safety
assessment, chapter R.12:
PROC 1: Use in closed processes.
PROC 8 (Transfer): Dilution of concentrated products, application of drain cleaners, dosage of textile
washing agents.
PROC 10 (Roller application or brushing): Processing without large-scale spraying.
PROC 11 (Spraying outside industrial settings): Processing with large-scale spraying (e. g. high
pressure cleaning, foam gun).
PROC 19 (Hand-mixing with intimate contact): Hand cleaning and disinfection.
Relevant H- and EUH-phrases (Number and full text)
H 302 Harmful if swallowed.
H 314 Causes severe skin burns and eye damage.
H 315 Causes skin irritation.
H 318 Causes serious eye damage.
H 319 Causes serious eye irritation.
H 412 Harmful to aquatic life with long lasting effects.
Further Information
The above information describes exclusively the safety requirements of the product and is based on
our present-day knowledge. The information is intended to give you advice about the safe handling of
the product named in this safety data sheet, for storage, processing, transport and disposal. The
information cannot be transferred to other products. In the case of mixing the product with other
products or in the case of processing, the information on this safety data sheet is not necessarily valid
for the new made-up material.
(The data for the hazardous ingredients were taken respectively from the last version of the sub-contractor's
safety data sheet.)