Warranty

5. As per drawing, L1 is distance
between the two lines on straight
tube.L2 is distance between the
two lines on connecting pipe
003/004
WALL-HUNG TOILET WALL-HUNG TOILET
2. Draw the lines as above picture
1. Fully insert straight tube
into cistern flushing outlet
and connecting pipe into
discharging outlet.
3. Apply lubricant on rubber washers
of straight tube and connecting
pipe,then insert into ceramic holes.
4. Draw the lines as above picture
6. Cut the straight tube and
connecting pipe as per above
drawing.
7. Polishing the cutting surface to
get chamfer angle as per drawing
and deburring
8. Apply lubricant on joint surface of
straight and connecting pipe.
9. Five accessories: part A.B.C.D.E
10. Fix the part B into the screw as
the above picture
11. Put part C into the installing
hole on the pan
12. Insert the part C into Part B.
13. Fix part into the hole on part C by tool part A .
14.Cover part E on the hole of the pan
5. As per drawing, L1 is distance
between the two lines on straight
tube.L2 is distance between the
two lines on connecting pipe
2. Draw the lines as above picture
1. Fully insert straight tube
into cistern flushing outlet
and connecting pipe into
discharging outlet.
3. Apply lubricant on rubber washers
of straight tube and connecting
pipe,then insert into ceramic holes.
4. Draw the lines as above picture
6. Cut the straight tube and
connecting pipe as per above
drawing.
7. Polishing the cutting surface to
get chamfer angle as per drawing
and deburring
8. Apply lubricant on joint surface of
straight and connecting pipe.
9. Five accessories: part A.B.C.D.E
10. Fix the part B into the screw as
the above picture
11. Put part C into the installing
hole on the pan
12. Insert the part C into Part B.
13. Fix part into the hole on part C by tool part A .