Installation Guide

Full Guidelines________________________________________________________________________
_________________________________________________________________________________________________________________________________________________
DECO PRODUCTS ® is a registered brand and logo on the US Patent and Trademark Office (USPTO) property of Deco Products Global, LLC.
!
SUBFLOORS SUITABILITY FEATURES BEFORE INSTALLING
• Base floor should be dry and firm while dust, oil, and wax free.
Controlling the humidity will create a better atmosphere for floor.
• Planks can be installed over concrete, plywood, and ceramic tiles, which
have been properly prepared before. If plywood, make sure all nails be
inside, and if tiles be sure to fill possible floor grooves stuffing them with
gypsum or a similar compound to get a completely flat surface.
• Can be installed with traditional waterbased underfloor, cooling or
heating. We recommend systems without electric wires.
• This is an indoor floor product.
• If the installation area could be subject to heat above 105°F (41°C)
please choose a high temperature adhesive.
• The best temperature for installation is between 61°F (16C°) and 81°F
(27°C).! The lower the temperature, the more difficult the installation
because planks becomes less flexible.
• 48 hours after installation floor can be normally use.
RECOMMENDED ADHESIVE
• Use Universal Pressure sensitive adhesive formulas for Vinyl Flooring
LVT or a High temperature sensitive adhesives depending on your
installation area temperature.
• Solid cross-linking formulations designed for installing luxury/solid vinyl
tiles and planks with bond and shear strengths are recommended.
• Adhesives with features moisture and plasticizer migration resistance
for homogeneous and heterogeneous sheet flooring will work properly
with our floors.