WALL MOUNTED POT FILLER FAUCETS Tools You Will Need / Pliers Dill Cross Screwdriver Adjustable wrens Pipe tads Allen key For easy installation of your faucet, you will need: To read all the instructions completely before beginning. Ta read all warnings, care and maintenance information. To purchase the correct water supply hook-up: WARNING: Connection Cold Water Only. Wall Mount Models.
Installation i WEBS WANE Tonnes ts Cod Winter Only 1. Senescent io 12" iPS supply line, The pipe should extend .1#2" past the finished wall surface. 2. Place wall flange [1) onto the faucet as shows Thread faucet onto pipe. 3. Masthead screw holes (1) blithe flange: Huntress the faucet from the pipe. 4. Drill holes ‘where marked. If using the provided anchors (1).
5. Wrap plumber tape (13 around pipe threads, Install the gasket (2) and the flange (3) using the: 3 screws (and anchors if required) provided: 6. Place flange tim (1): onto the faucet as shown. Thread faucet onto pipe. Tighten sacredly, Butte not-over tighten, 7. Tighten set screw in flange {1}: Elide flange trim {2} over the wall flange.
Checking and Testing Flush Your System Reeve aerator (1) and tim fayest handles (2) td the fll on position. Tim: off cold water supplies and flush water Ines for one minute. Important: This flushes away any-debris that could cause damage to internal parts. Check all connections at-arrow for leaks.