Use and Care Manual

Repeat for all 3 ‘Top Poles’ and erect upright to create a
pyramid. Ensure all connecons are aached and secure.
5
www.hangoutpod.com
ASSEMBLY
INSTRUCTIONS
2
Repeat for all 3 sets of poles, ensuring all 3 connecons
are securely aached together.
*Important - Always use a nut and bolt on each pole to
lock together.
3
Aach the ‘Peak Top Connector’ to the male part of the
‘Top Pole’.
*Important - Always use a nut and bolt on each pole to
lock together.
4
Separate the 3 ‘Foot’ poles (with feet) from the 3 ‘Top’
poles (aaches to the ‘Peak Top Connector’).
1
Aach the male end of the ‘Foot Poles’ to the female end
of the ‘Top Poles’.
2
6
Lay the Strap Base Connector flat on the ground and feed
the foot of each pole through the adjoining strap loop.
Posion the loop directly under the metal stopper.
*Important - Ensure the loops are hooked on to the
poles, not the stoppers.