Owner's Manual (Complete)

Chapter 10—Programs and the Visual Programmer
44 The Home Control Assistant
Specific Hardware Elements
These elements are for specific hardware that you may or may not have.
IR
The IR element is used to send sequences of IR commands to a device. This element can only be
used if you have an interface that supports sending IR.
This dialog contains a number of parts. In the IR Devices list are all the devices you have setup
that use IR. In the right side of the dialog is shown the keypad associated with the device. As
explained in the appendix on IR interfaces, each IR device can have its own keypad.
To enter an IR sequence, push the buttons for the signals that you want to send. They are
displayed in the IR Sequence tree. New keycodes are entered after the currently selected item. To
delete the keycodes previously entered, select then and press the Delete button.
Depending upon the receiving device it may be necessary to space out the IR commands. Enter in
a time (in milliseconds) to delay between each key sent.