Owner's Manual (Complete)

Chapter 10—Programs and the Visual Programmer
The Home Control Assistant 47
LynX-PORT
The Lynx ADC test, Lynx analog, Lynx analog A/B, Lynx input, and Lynx relay elements are
described in Marrick Interfaces appendix.
Magic Module
The MM Caddx key, MM Speak, MM test Caddx, MM test input, MM test temp, element are
described in the Magic Module appendix.
PLC Firewall
This element controls the Lightolier Compose PLC Firewall and is described in the Lightolier
appendix.
Constructing programs
Now that you know about all the elements used in constructing programs, and the general methods
of using the Visual Programmer, you are ready to learn how to draw
Test and Repeat elements.
Test
Here is a sample program that uses a Test element.
Notice that from the Test element there are two connecting lines drawn: one goes to the Dim
element, the other to the Exit element. The connecting line to the Exit element is labeled “Yes,”
the other “No.” When you draw the
Test element and draw connecting lines from it to other
elements, you need to specify which connecting line to follow if the test succeeds or fails.
1. Right click one of the elements directly connected to the test element.
The popup menu contains two additional options: “Do when Test succeeds,” and “Do when
Test fails.”