Owner's Manual (Complete)

Chapter 2—HCA Properties
The Home Control Assistant
5
Client-Server
The client-server tab configures those settings necessary to have HCA operate in client-server
mode. This tab appears as:
The client-server settings are fully described in the client-server chapter
Hardware
The HCA properties tab for Hardware is the only place in HCA where you tell HCA about the type
of automation hardware connected to your computer.
HCA supports from one to four automation interfaces attached to your computer. Each must be
attached to its own serial or USB port
This can be used to get the best possible use from your hardware. For example you may have one
interface to handle Insteon devices and another for UPB devices. Both can be operating
simultaneously.