Owner's Manual (Complete)

Chapter 15—Power Track
The Home Control Assistant
3
More on linking is in the Insteon Appendix.
UPB Devices
UPB Devices use a simpler mechanism to enable them to report status when locally controlled. In
the UPB Configuration program, UPStart, in the properties of each device type that controls a load
is an option to report status when locally controlled. This option is on one of the device property
tabs. Here is a switch:
Note the 2
nd
checkbox from the bottom.
You don’t have to use that option if the device is set to transmit a link from the switch paddle or
keypad button. Once you have imported your UPB Network into HCA, the transmission of the
link from the device will keep HCA up to date on the device status.
For example, here is a KPLD configuration.