Owner's Manual (Complete)

Chapter 15—Power Track
8 The Home Control Assistant
Focus the graph on a single device or room
While a composite graph – showing data from more than one device or room – gives you an
overall picture of power usage over the selected time period – it may be advantageous to focus in
on a single device or room for the selected graphing period.
To do this either change the graph “source” dropdown in the ribbon or double click on a device in
the tabular list. The graph is redrawn to show just that device or room.
Look again at the graph shown above. By double-clicking on “Kitchen Lights” the graph is
redrawn to show power usage for just that device.
To return to the composite graph, use the Back button in the ribbon.
Show a breakdown for a single bar
The tabular list on the right side of the graph shows the breakdown – by cost or percentage – for
the whole graph. To show the breakdown for a single bar, all you need to is to click on the bar.
The label below the bar turns red to show it is selected and the tabular list shows data for only that
bar.
To return the tabular list for the whole graph, click someplace on the graph background.