Owner's Manual (Complete)

Chapter 21—Design Tools
2 The Home Control Assistant
Since there are many ways that a House and Unit code can be used in your design, the Inventory
displays not on the name of the item but how it is used. The possibilities are:
 Device primary address. This is what is assigned to the device on the X10 address tab.
 Device trigger. A device retransmission trigger.
 Program trigger. An X10 trigger for a program.
 Group trigger. A retransmission trigger for a group.
 Device scene. The X10 address of a scene stored in a device.
In the case of a multi-unit device, the name is suffixed with a colon and the unit number.
Viewing settings
The display area on the left of the dialog box lists each of the 16 house codes. Each house code
that you have already used is marked with a minus sign (-) indicating that it has unit codes already
assigned.
Beneath each house code, you will see its 16 unit codes. Each unit code that is used by a device,
program, or group in your design, shows the name of the item it is assigned to.
You can expand or contract the house codes to hide or view the assigned unit codes.
On the right side of the dialog box are some useful controls:
 The Inventory checkboxes allow you to only show those types of items that are checked off.