Owner's Manual (Complete)

Chapter 21—Design Tools
The Home Control Assistant 3
 The show checkboxes allow you to show all house and unit code assignments or just ones that
are assigned to more than one item. This may show you a problem in your design.
 A Test button sends an ON then and OFF command to the house and unit code selected. This
may help you determine if you have the correct house and unit code selected in the module or
switch. You do this by using the Test button and seeing if the light or appliance goes on.
 A Done button that closes the dialog box.
Changing settings
The House Code and Unit Code Inventory dialog box not only displays X10 settings for devices,
programs, and groups, but also lets you change them.
To change a setting
1. Select the object in the tree and double-click the left mouse button.
The New X10 Settings dialog box appears.
The dialog box shows the house and unit code for the device, program, or group you selected.
You can change the setting with the
House code and Unit code lists.
1. Simply click the arrow, and select the new house or unit code that you want assigned to the
object you have selected.