Owner's Manual (Complete)

Chapter 4—Devices
The Home Control Assistant 5
The next step for the Wizard depends upon what type of device you are creating. For an Insteon
device, in this step you select the address settings. The test button can be used to send an On then
an Off command to the selected address. This gives you a quick way to verify that you have
selected the correct settings.
Now you get to choose the icon that you want to represent this device on a display. The listing
includes all device icons provided in the default Icon Theme. See the chapter on Icon Themes for
more information.
When you first get to this step, HCA tries to choose an icon based upon the name you supplied and
the type of device. Sometimes it chooses well and other times not.
Click the icon that you want to use, and click Finish as this is the last step in the wizard