Owner's Manual (Complete)

Chapter 7 - Schedules
The Home Control Assistant 7
4. The next step of the Schedule wizard is to select if this new schedule is to be a parent schedule
or a child of another schedule.
Once you have created a schedule, you can modify its properties by first selecting the schedule in
the design pane, then right click with the mouse and choose Properties from the popup menu. The
properties are almost the same as those you created using the wizard. Refer to
Modifying an
Existing Schedule
later in this chapter, for details.
Now you are ready to create schedule entries.
Note: Whenever you select a schedule name in the design pane the Visual Scheduler opens.
This happens also when you first create a schedule. The Visual Scheduler is described
in the next chapter.
Creating a new schedule entry
Once you have one or more schedules, you can add entries to the schedules. (An entry contains the
date and time that one device or group is turned on or off.) This is done in either of two ways:
you can use the Schedule Entry Wizard to create any schedule entry, or you can use the Visual
Scheduler, which allows you to graphically create new schedule entries. This section discusses the
Schedule Entry Wizard. Refer to chapter 7 for details about the Visual Scheduler.
1. On the Home Control Assistant menu bar, click New, and then choose Schedule Entry.
This opens the Schedule Entry Wizard.