Item # 760275 Model # HS1047.2A ASSEMBLY INSTRUCTIONS Storage Cabinet Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. – 6 p.m., EST, Monday - Friday 1-877-527-0313 WWW.HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed through the products of this cabinet. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Table of Contents Table of Contents……………………………….………2 Safety Information…………………...…………………2 Warranty………………………………………………….2 Pre-Assembly……………………………………………3 Tools Required…………………………….…………3 Planning Assembly………………………………….3 Hardware Included…………………………………..3 Package Contents……………………………………4 Assembly…………………………………………………5 Weight Limits…………………………………………..10 Safety Information Please read and understand these instructions before assembling and using this bookcase. Save these instructions for future reference.
Pre-Assembly PLANNING ASSEMBLY Compare all parts with the Hardware Included and Package Contents list. If any part appears missing or damaged, do not assemble this product and contact the Customer Service Team at 1-877-527-0313 or visit www.homedepot.com. TOOLS REQUIRED Phillips screwdriver (not provided) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS A E G I C D F C D I B H H H H Part Description Quantity A B Top panel Bottom panel 1 1 C Side panel 2 D Side vertical 2 E Top crossbar 1 F Fixed shelf 1 G H Back panel Foot 1 4 I Partition panel 2 4
Assembly 1 Preparing the top panel and bottom panel Securely screw cam bolts (K) into the designated small holes on the top panel (A). Follow the same step to assemble the bottom panel (B). K K A B 2 Preparing the fixed panel Securely screw cam bolts (K) into the designated small holes on the fixed panel (F), follow the same step to assemble the back side of the fixed shelf (F). Then insert four wood dowels (J) into the designated big holes on the side of fixed shelf (F).
Assembly (continued) 3 Preparing the side panel and top crossbar Securely screw cam bolts (K) into the designated small holes on the side panel (C). Insert wood dowels (J) into the top, bottom and front inner holes of the side panel (C). Insert two wood dowels (J) into the designated big holes on the top crossbar (E). K x J 2 J C E 4 Preparing the partition and side vertical Insert wood dowels (J) into the top and bottom inner holes of the partition (I).
Assembly (continued) 5 Installing the feet and top crossbar Screw four feet (H) into the bottom of the bottom panel (B). Align and attach the top crossbar (E) to the top panel (A) with three screws (M). H H H H M E B A 6 Installing the side vertical and partition Align and attach the side vertical (D) to the side panel (C) with two cam locks (L). Position two partitions (I) by the inserted wood dowels and press them together with the fixed shelf (F).
Assembly (continued) 7 Installing the side panel Position the side panels (C) onto the inserted wood dowels. Press them together with the fixed shelf (F) and secure in place by connecting the cam locks (L). C F L C 8 Installing the bottom panel Align and attach the side panels (C) and partition (I) to the bottom panel (B) with six cam locks (L).
Assembly (continued) 9 Installing the top panel Position the top panels (A) onto the side panel (C) and partition (I), and secure in place by connecting the cam locks (L). A C L I C 10 Installing the back panel Pick up the back panel (G) and align the drilled holes against the upper long edge with the pilot holes on the back stretcher of the top panel (A). Attached the back panel (G) in place using the provided screws (N). N G 9 WWW.HOMEDEPOT.
Assembly (continued) WEIGHT LIMITS This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. WARNING: Please ensure that all the objects are removed before moving the assembled unit. The unit must be lifted by more than one person, not dragged or pushed. Failure to do so will cause product damage, instability, product collapse, and/or serious injury.
