Installation Guide

1. Install The Supply and Stop
Determine the roughing-in distance from the wall to the faucet
inlet, and install the water supply line accordingly.
Remove the coupling nut from the supply tube. Remove the
supply from the body assembly. Wrap thread sealant tape around
the threads on both ends of the supply.
Thread one end of the supply back into the body assembly.
Tighten with a clean strap wrench.
Slip the escutcheon over the other end of the supply. Thread the
body assembly and supply into the water supply. Make sure the
outlet on the body assembly is facing straight up. Tighten with a
clean strap wrench.
Slip the coupling nut over the supply tube. The coupling nut will
be connected to the faucet. Loosen the nut at the outlet of the
body assembly, and insert the plain end of the supply tube.
Tighten the nut with a wrench.
Connect to the faucet.
Repeat.
Supply
Tube
Coupling
Nut
Nut
Supply
Escutcheon
Body
Assembly
Kohler Co. 3 088753-2-AC