Cast Aluminum Bar Height Stool CO6105
PARTS LIST A B Back Panel 1 PC C D Left Arm 1 PC Seat Panel 1 PC E Right Arm 1 PC F Seat Cushion 1 PC HARDWARE LIST #1 #2 M6X15mm Short Bolt 4 PCS M6X25mm Long Bolt 8 PCS #4 #3 M6mm Flat Washer 12 PCS EXTRA HARDWARE LIST #1 #2 M6X25mm Long Bolt 2 PCS #3 M6X15mm Short Bolt 1 PC M6mm Flat Washer 3 PCS 2 M6mm Allen Key 1 PC Foot Support 1 PC
Step 1. Attach arms (part #C&D) to seat panel (part #B) using long bolts (part #1), washers (part #3) and allen key (part #4). NOTE: Please do not fully tighten bolts until unit is fully assembled. #3 #1 #4 B C D #1 X4 #3 X4 #4 X1 Step 2. Attach back panel (part #A) to arms (part #C&D) using long bolts (part #1), washers (part #3) and allen key (part #4) NOTE: Please do not fully tighten bolts until unit is fully assembled.
Step 3. Attach foot support (par #E) to front leg using short bolts (par #2), washers (part #3) and allen key (part #4) NOTE: Please fully tighten all bolts at this time. E C D #4 #3 #2 Step 4. Carefully turn the stool upright and place seat cushion (part #F) on the stool.