Model # EX-32 1/12/2012 Page 1 of 10
1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic coated elements. Ultra Play guarantees all items for one full year to be free of defects in workmanship or materials when installed and maintained properly. We agree to repair or replace, any items determined to be defective.
SAFETY WARNINGS & EQUIPMENT INSPECTION • Owners and installers please note these safety warnings and make use of this checklist on a regular basis. • Follow installation instructions when erecting equipment. • Ground surfaces around equipment should be restored as needed. Concrete footings should never be exposed. Surface depth should comply with ASTM and CPSC specifications. • Check for and repair damage caused by wear or vandalism, a major factor in injury causing situations.
ULTRA SITE PRODUCT SPECIFICATIONS EX-32 32 GALLON TRASH RECEPTACLE Receptacle Coating: Oven fused functionalized polyethylene copolymer-based thermoplastic. Fluidized bed coating application with superior mechanical performance, impact resistance and UV-stability. Material: 3/4” #9 steel expanded metal. 11 gauge x 1-1/2” flat strip border the top and bottom of the expanded metal, and the vertical seam. Bottom plate fabricated from 11 gauge sheet steel laser cut for a precision fit.
IN-GROUND MOUNTING OPTION INGROUND MOUNT FOR TRASH RECEPTACLE Frame: 2-3/8” O.D. x 12 gauge pre-galvanized structural steel tubing. Mounting points 3 gauge 8” x 8” steel flat bar. All electrically MIG welded. Frame Coating: Electrostatic powder coated application oven cured. Hardware: All stainless steel hardware fasteners. (Included). Dimensions: Overall dimension is 24 1/4” x 8” x 8”. Attach the IG KIT to the EX-32 as shown using specified hardware.
SURFACE MOUNT MOUNTING OPTION SURFACE MOUNT FOR TRASH RECEPTACLE Frame: 2-3/8” O.D. x 12 gauge pre-galvanized structural steel tubing. Surface mounting points are 3 gauge 8” x 8” steel flat bar with four holes. Receptacle mounting points are 3 gauge 6” x 6” steel flat bar with 4 holes. All electrically MIG welded. Frame Coating: Electrostatic powder coated application oven cured. Hardware: All stainless steel hardware fasteners. (Included). Dimensions: Overall dimension is 3-3/4” x 8” x 8”.
TOOLS AND HARDWARE REQUIRED FOR MOUNTING OPTIONS 1/2" Wrench 1/2" Socket Wrench 5/16" Washer Tape Measure Level 5/16" Kep Nut 5/16" x 1" Machine Bolt 1/12/2012 Page 7 of 10
LID OPTIONS 32 GALLON FLAT TOP 32 GALLON RAIN BONNET TOP Material: Top plate shall be fabricated from 18 gauge steel flat, spun to form. Outside shall have a 1” radius. Coating: Oven fused functionalized polyethylene copolymer-based thermoplastic. Fluidized bed coating application with superior mechanical performance, impact resistance and UV-stability. Material: Top plate shall be fabricated from 18 gauge steel flat, spun to form. Vertical posts are 1/2” diameter steel rods.
LID OPTIONS 32 GALLON ASH URN TOP 32 GALLON ROUND TOP Material: Top plate shall be fabricated from 18 gauge steel flat, spun to form. Vertical posts are 1/2” diameter steel rods. Bonnet top shall be fabricated from 20 gauge steel flat, spun to form. Ash urn shall be fabricated from 20 gauge steel flat, spun to form. All electrically MIG welded. Coating: Oven fused functionalized polyethylene copolymer-based thermoplastic.
LINER OPTION PL-32 Heavy Duty Plastic 1/12/2012 Page 10 of 10
