Instructions / Assembly

Hold the enclosure net (Enclosure Part C), with sleeves facing up. Pull each
section of the fiberglass rod (Enclosure Part D) through each sleeve on the net.
Connect the ends together forming a circle. This is easier when two people hold
the net.
Step 4 :
A. Align the two parts of the Pole Clip (Enclosure Part E) according to the below
diagram.
B. Insert over each open section of the fiberglass loop.
C. Insert the pole caps which are now holding the fiberglass ring, over the
enclosure poles, and secure with locking pins.
Step 5 :
13