TDS

Page 1 of 2
NxT-30 Surface Cleaner and Stain Remover is a recommended and designed to be used as a cleaner prior to the application of Pre-
Tect Antifungal Coating. It is intended to be used in non-confined spaces during construction of new homes, apartments,
commercial buildings or any construction project that uses materials that have acquired stains from exposure to dirt, rain, mold or
mildew.
Features/Benefits
Technical Information
Result
Property
Appearance
Clear to Light Yellow-Green Liquid
Application Temperature
Pot Life
Key Ingredient
Packaging
This product is available in 1, 5, and 250 gallon containers. Other quantities available upon request.
Soap and Water
pH
Solubility
Soluble with Water
12.0-13.0
Above 32°F
1 Month
Not Flammable
≈ 1.04
NxTech
NxT-30 Surface Cleaner and Stain Remover
Technical Data Sheet (TDS)
Flash Point
Clean Up
Mild Acid Odor
Sodium Hypochlorite 1%
Storage
Store in a Cool Dark Area. Keep Out of Reach of Children.
Description
Primary Applications
NxT-30 Surface Cleaner and Stain Remover is a mild, effective cleaner to remove dirt and tough stains from substrates such as
concrete, tile, wood, grout and brick. NxT-30 Surface Cleaner and Stain Remover is an excellent for removing stains caused by Mold
and Mildew.
Odor
Specific Gravity
*Ready to Use
*Removes Tough Stains Caused by Mold and Mildew
*Soluble with Water
*Easy to Apply
Corrosive
Yes
The coverage rate will vary depending upon surface porosity and application method use. The typical range is approximately 200 to
500 sq. ft. per gallon per application on smooth surfaces.
Coverage