Manualshelf

Instructions / Assembly

ManualsBrandsUnbranded ManualsAccessibility Ramps30 ft. Solid Surface Ramp Kit with Vertical Pickets
31323334353637383940
Page 31 of 72
4.4.4. For Vertical Picket platform handrails, pre-assemble the handrails by inserting a 5/16”-18
x 1” long hex bolts through a 5/16” flat washer, the angle post, and into a 5/16”-18 round
threaded insert in the handrail or square threaded insert in the vertical pickets. Use the
holes shown in FIG. 4.7.
FIG. 4.7
4.4.5. For Horizontal Picket platform handrails, pre-assemble the handrails by inserting a 5/16”-
18 x 1” long hex bolt through a 5/16” flat washer, the angle post, and into a 5/16”-18
round threaded insert in the handrails and curb. Use the holes shown in FIG. 4.8.
FIG. 4.8