Use and Care Manual

7) Place the freezer door on the middle

hinge. Ensure that the door is aligned

horizontally and vertically, and that the

gasket seals on all sides before attaching

the top hinge. Attach the top hinge and

replace the hinge cover.

2.3 Door Space Requirements

The unit's door must be able to open fully as shown.

W×D≥1050×1090mm

2.4 Levelling the Unit

To do this adjust the two levelling feet at the front of the unit.

If the unit is not level, the door and magnetic seal alignments

will not be covered properly.

Look down from the top, clockwise and counterclockwise loosening, tightening.

2.5 Cleaning Before Use

Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm

water using a 'Wrung-out' sponge or cloth. Wash the shelves and salad bin in warm soapy water

and dry completely before replacing in the unit. Clean the exterior of the unit with a damp cloth.

If you require more information refer to the Cleaning section.