Model # RH5H1-ORB/RH5H1-BN USE AND CARE GUIDE 42 IN. CEILING FAN An electronic copy of this user manual can also be obtained online at homedepot.com THD_RH5H1_UD42.
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Care and Cleaning . . . . .
Warranty LIMITED WARRANTY WHAT IS COVERED The retailer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser.
Pre-Installation (continued) PACKAGE CONTENTS NOTE: Unpack your fan and check the contents. You should have the following items listed below A B D C E F G Part Description H Quantity A Supporting bar 1 B Motor housing 1 C Fan motor with switch housing 1 D Set of blade holders (with blade holder screws pre-installed) 5 E Set of blades 5 F Glass shade 1 G H Pull chain pendant 9 Watt E-26 (LED, A19) Bulb 2 1 4 THD_RH5H1_UD42.
Installation 1 2 Determining mounting method WARNING: To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked acceptable for fan support of 15.9 Kg (35 lbs) or less and use mounting screws provided with the outlet box. Installing the support bar NOTE: You may need a longer downrod to maintain proper blade clearance when installing on a steep, sloped ceiling. The maximum angle allowable is 18° away from horizontal.
Installation (continued) 3 Making the electrical connections □ If you choose to install another light kit, it must be a UL Listed light kit accessory marked suitable for use with this fan. Follow the instruction packed with the light kit. WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. If you are not sure the electrical box and fan are grounded, contact a licensed electrician for advice. They must be grounded for safe operation.
Installation (continued) 4 Finishing the installation 1 □ Match the three holes at two ends of the supporting bar (A) with three screws of the hanger. Secure the fan assembly onto the supporting bar (A) using the preassembled screws (1) and washers (2) (Figure 7 and 8). A 2 □ Fix the motor housing (B) onto the supporting bar (A) by tightening the four screws (3) preassembled to the motor housing (B) (Figure 9). Figure 8 □ Attach the fan pull chain pendant to the pull chain on the switch assembly.
Installation (continued) 5 Attaching the fan blades NOTE: Your fan blades are reversible. Select the blade side finish which best accentuates your decor. Failure to follow above procedure could result in fan wobble. □ Mount the blade holders (D) to the fan blades (E) using the screws (1) provided – 3 per blade (Figure 10). Please note the rubber washers are pre-attached to the blade holder (D).
Installation (continued) Balancing the blades Installing the light kit All blades are grouped by weight. Because natural woods vary in density, the fan may wobble even though the blades are weight matched. WARNING: To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan before installing light kit. The following procedure should correct most fan wobble. Check for wobble after each step. CAUTION: Do not use pliers or screwdrivers to tighten the thumb screws.
Operation Operating NOTE: Wait for the fan to stop before changing the setting of the slide switch. The pull chain controls the fan speed as follows: 1 pull – High, 2 pulls – Medium, 3 pulls – Low, and 4 pulls – Off. The slide switch controls direction: forward (switch down) or reverse (switch up).* Speed settings for warm or cool weather depend on factors such as the room size, ceiling height, number of fans, and so on.
Care and Cleaning WARNING: Make sure the power is off at the electrical panel box before you attempt any repairs. Refer to the section Making Electrical Connections Section. Here are some suggestions to help you maintain your fan. □ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. (It is not necessary to remove the fan from the ceiling.
An electronic copy of this user manual can also be obtained online at homedepot.com Retain this manual for future use. THD_RH5H1_UD42.
Núm. de modelo RH5H1-ORB/RH5H1-BN GUÍA DE USO Y CUIDADO VENTILADOR DE TECHO DE 42 PULG. Puede obtener también una copia electrónica de este manual del usuario en línea en homedepot.com. THD_RH5H1_UD42.
Tabla de contenido Tabla de contenido . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Información de seguridad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Garantía . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pre-instalación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Operación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Cuidado y limpieza . . . . . . . . .
Garantía GARANTÍA LIMITADA LO QUE ESTÁ CUBIERTO El distribuidor garantiza que el motor del ventilador está libre de defectos en materiales y mano de obra presentes en el momento del envío de la fábrica por un periodo de vida después de la fecha de compra por el comprador original.
Pre-instalación (continuación) CONTENIDO DEL PAQUETE NOTA: Desempaque su ventilador y compruebe el contenido. Debe tener los siguientes artículos listados a continuación.
Instalación 1 Determinación del método de montaje 2 Instalación de la barra soporte NOTA: Puede necesitar un vástago de extensión para mantener un espacio libre de aspa adecuado cuando instale sobre un techo inclinado. El ángulo máximo permisible es de 18° a partir de la horizontal. Si el dosel toca el vástago de extensión, retire la cubierta decorativa del dosel (C) y gire el dosel (B) 180° antes de instalar el dosel (B) al soporte de montaje (A).
Instalación (continuación) 3 Cómo hacer las conexiones eléctricas □ Si desea instalar otro juego de lámparas, debe ser un accesorio de juego de lámparas Listado UL marcado como adecuado para ser usado con este ventilador . Siga las instrucciones que vienen con el juego de lámparas. ADVERTENCIA: Para evitar un posible choque eléctrico, asegúrese de que la electricidad esté desconectada en la caja de fusibles principal antes del cableado.
Instalación (continuación) 4 Finalización de la instalación 1 □ Haga coincidir los tres agujeros en los dos extremos de la barra de soporte (A) con tres tornillos del colgador. Asegure el ensamblaje del ventilador sobre la barra de soporte (A) usando los tornillos preensamblados (1) y arandelas (2) (Figura 7 y 8). A 2 □ Fije la carcasa del motor (B) sobre la barra de soporte (A) apretando los cuatro tornillos (3) preensamblados a la carcasa del motor (B) (Figura 9).
Instalación (continuación) 5 Instalación de las aspas del ventilador NOTA: Las aspas de su ventilador son reversibles. Seleccione el acabado lateral del aspa que mejor acentúe su decoración. No seguir el procedimiento anterior puede resultar en bamboleo del ventilador. □ Coloque el porta aspas (D) bajo el motor de modo que el poste de alineamiento en el porta aspas encaje dentro de la ranura (3) en el motor (Figura 11).
Instalación (continuación) 6 Cómo equilibrar las aspas 7 Instalación del juego de lámparas Todas las aspas están agrupadas por peso. Debido a que las maderas naturales varían en densidad, el ventilador puede bambolear incluso si las aspas concuerdan en peso. ADVERTENCIA: Para reducir el riesgo de choque eléctrico, desconecte el circuito de suministro eléctrico al ventilador antes de instalar el juego de lámparas. El siguiente procedimiento debe corregir la mayor parte del bamboleo del ventilador.
Operación Cómo operarla NOTA: Espere a que el ventilador se detenga antes de cambiar el ajuste del interruptor corredizo. La cadena controla la velocidad del ventilador como sigue: 1 tirón– Alta, 2 tirones– Media, 3 tirones– Baja, y 4 tirones– Apagado. El interruptor corredizo controla la dirección: hacia adelante (interruptor abajo) o reversa (interruptor hacia arriba)*.
Cuidado y limpieza ADVERTENCIA: Asegúrese de que la energía esté desconectada en la caja del panel eléctrico antes de intentar cualquier reparación. Consulte la sección Cómo hacer conexiones eléctricas. Aquí tiene algunas sugerencias para ayudarle a mantener su ventilador. □ Debido al movimiento natural del ventilador, algunas conexiones se pueden aflojar. Revise las conexiones del soporte, soportes y acoplamientos de las aspas dos veces al año. Asegúrese de que estén seguras.
Puede obtener también una copia electrónica de este manual del usuario en línea en homedepot.com. Conserve este manual para uso futuro. THD_RH5H1_UD42.