SDS

Material Safety Data Sheet
Report No.:STR13078154S Page 7 of 10
SEM.Test Compliance Service Co., Ltd.
3/F,Jinbao Commerce Building, Xin'an Fanshen Road,
Bao'an District, Shenzhen, P.R.C
Flash Point Not available.
Upper/lower flammability or explosive limits Not available.
Vapor Pressure:
Not applicable
Vapor Density: (Air = 1)
Not applicable
Density/relative density Not available.
Solubility in Water: Insoluble
n-octanol/water partition coefficient Not available.
Auto-ignition temperature
130°C
Decomposition temperature Not available.
Odout threshold Not available.
Evaporation rate
Not available.
Flammability (soil, gas) Not available.
Viscosity Not applicable
Section 10 - Stability and Reactivity
Stability The product is stable under normal conditions.
Conditions to Avoid (e.g. static discharge, shock
or vibration)
Do not subject Li-ion Polymer Battery Pack to
mechanical shock.
Vibration encoutered during transportation does
not cause leakage, fire or explosion.
Do not disassemble, crush, short or install with
incorrect polarity. Avoid mechanical or electrical
abuse.
Incompatible Materials Not Available
Hazardous Decomposition Products This material may release toxic fumes if burned
or exposed to fire
Possibility of Hazardous Reaction Not Available
Section 11 - Toxicological Information
Irritation Risk of irritation occurs only if the cell is
mechanically, thermally or electrically abused to
the point of compromising the enclosure. If this
occurs, irritation to the skin, eyes and respiratory
tract may occur.
Sensitization Not Available
Neurological Effects Not Available
SEM. Test Compliance