Instructions / Assembly

Option 2: Balance Trike: Wheel Assembly
9
Place the assembled main frame upside down. 3.1 Align the hole marked “2” on the swing arm bracket with the hole on the swing arm. Insert the bracket bolt (No. 0) from the seat side, and secure in place with a flat head bolt (No. 6) from underneath the swing bracket. 3.2 Place both wheels (No. 4) on the inside edge of the swing arms, so that the wheel axel holes align perfectly with the holes marked “2” on the swing arms. Now insert the wheel bolt (No. 10) and secure in place with flat head bolt (No. 7) using the Allen Keys (No.12).
WARNING: DO NOT use the pedals with this option to avoid possible injury. Make sure
the bolt set is tightened and not loose.
10
7
6
DO NOT insert bolt 0 from underneath
the swing bracket, as it will not fit from this side.