Instructions / Assembly

10
Place the assembled main frame upside down. 4.1 Align the hole marked “3” on the swing arm bracket with the hole on the swing arm. Insert the bracket bolt (No. 0) from the seat side, and secure in place with a flat head bolt (No. 6) from underneath the swing bracket 4.2 Place one wheel (No. 4) on the inside edge of the swing arm, so that the wheel axel holes align perfectly with the holes marked “3” on the swing arms. Now insert the wheel bolt (No. 11) and secure in place with round head bolt (No.7) using the Allen Keys (No. 12).
6
11
7
WARNING: DO NOT use the pedals with this option to avoid possible injury. Make sure the bolt set is tightened and not loose.
Option 3: Wheel Assembly: Balance Bike
DO NOT insert bolt (No. 0) from underneath
the swing bracket, as it will not fit from this side.