Instructions / Assembly

Option 1: Tricycle: Wheel Assembly
6
Place the assembled main frame upside down. 2.1 Align the hole marked “1” on the swing arm bracket with the hole on the swing arm. Insert the bracket bolt (No. 0) from the seat side, and secure in place with a flat head bolt (No. 6) from underneath the swing bracket.
6
9
7
7
2.2 Place the wheel (No. 4)_on the outside edge of the swing arm, so that the wheel axel hole aligns perfectly with the hole marked “1” on the swing arm.
DO NOT insert bolt
(No. 0) from under- neath the swing bracket, as it will not fit from this side.
2.3 Now insert the wheel bolt (No. 9) through the hole marked “1” on the swing arms and the wheel axel hole, and secure in place with round head bolt (No. 7). IMPORTANT: To allow the wheels to spin freely, do not over tighten the bolt sets. See the next page for pedal assembly.