, USER S MANUAL METAL CUBE 4+4 A0031-GYDG
Contact Us! Need Help! Do NOT return this item. Contact our friendly customer service department for help first. Before You Start Please do not exceed the weight limitation of each items Do not stand on or use any part of this item as step ladder Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included.
x4 x4 L G C K F F E B G D M A M H H J J I x1 Notice: 1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable. 3. Tighten up all screws with tools gradually. 4. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process. 5.
A B 4 pcs 4 pcs D C E 4 pcs G F I 2 pcs 8 pcs K 2 pcs 8 pcs 4 pcs H J 4 pcs 1 pc L 4 pcs 4 4 pcs
M 1 2 pcs 3 2 M6x35 mm (56 pcs ) 4 M6 (4 pcs ) 1 pc 5 M6x15 mm (44 pcs )
STEP 1 c D 1 1 1 pc STEP 2 B 1 1 1 1 1 4 pcs 6
STEP 3 1 1 1 A 1 1 4 pcs STEP 4 7
STEP 5 F F 1 1 1 1 E 1 4 pcs STEP 6 G 2 2 2 G 2 2 2 2 2 8 pcs 8 2
STEP 7 STEP 8 H H 33 1 3 3 1 1 3 1 3 1 4 pcs 4 pcs 9
STEP 9 I 2 2 2 2 2 4 pcs STEP 10 J 2 J 2 2 2 2 2 2 2 8 pcs 10 2
STEP 11 STEP 12 M K M L 11
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Check bolts/screws periodically and tighten them if necessary.
