User's Manual

4. Installing the Scorpion Telephone Base

Before installing the Scorpion telephone base, ensure that the DHCP is

enabled in the router. To configure the DHCP, refer to your router’s

documentation. To install the Scorpion telephone base:

1. Connect the telephone line cord to the telephone base and to the

telephone outlet.

2. Connect the ethernet cable to the telephone base and to the

broadband router.

3. Plug the base power adapter into the telephone base and connect

the other end to an electrical outlet.

The power light should be steady, which indicates that the power is on.

The following diagram illustrates a typical network layout after installing the

Scorpion.