User's Manual

4
4. Installing the Handset
To install the handset:
1. Plug the power adapter into the handset charger and connect the
other end to an electrical outlet. The power adapters for the base
and for the handset are identical.
2. Insert the battery into the handset.
3. Place the handset on the charger for charging. It is recommended
that you charge the handset for 16 hours before first use.
After the battery is fully charged, you can expect the following performance:
Operation
Operating Time
While in use (handset/headset)
5 hours
While standby
5 days
You need to charge the battery when:
The battery is new.
The battery indicator on the handset display is empty and flashing
red.
Registering the Handset
You can register a maximum of five handsets for a telephone base. To register
a handset:
1. Press and hold the paging button on the telephone base until the
“Line in use” LED starts blinking.
2. On the handset, select the Menu softkey. If the Menu softkey is not
available, press and hold the Off button until you see the idle
screen with the Menu softkey.
3. From Menu Settings, select Phone Settings.
4. From Phone Settings, select Registration.
5. Select Yes to confirm registration.
After registration is successful, a circle is displayed in the upper-left corner of
the screen. A filled green circle indicates a healthy signal from the telephone
base, whereas an empty red circle indicates that there is no signal.