User's Manual

- 10 -
Press MENU to access the Menu system. The screen displays the selection’s current status. For example, if you
press
MENU and the screen displays Voice: ON, you have the option of turning Voice to OFF.
Use the following keys to navigate the menus:
x MENU : Change a menu item setting (press and hold to exit the Menu system).
x VOL + : Go to the next Menu item.
x VOL – : Go to the previous Menu item.
Several menu items only display if GPS is set to ON. These entries are noted in the following table.
MENU ITEM WHAT IT DOES SETTINGS
Highway Changes band sensitivity as follows:
ͳ Highway - Full Sensitivity
ͳ City - X and K sensitivity reduced. Ka band
sensitivity same as Highway.
ͳ City 2 - X band detection off; K band
sensitivity reduced. Ka band sensitivity same
as Highway.
Highway (Default)
City
City 2
GPS Determines your geographic location.
If GPS is turned on, other GPS-related menu items
display.
On (Default)
Off
Speed Camera
(GPS on)
Notifies you if any speed cameras are nearby. On (Default)
Off
Redlight Cam
(GPS on)
Notifies you if any red light cameras are nearby. On (Default)
Off
RLC Q-Ride
(GPS on)
Red Light Camera Quiet Ride - Mutes red light
camera alarms if you drive over the speed limit set
here.
50 - 85 mph (80 - 140 km/h)
Off
Voice Turns voice alert on or off under the following
conditions:
• Type of radar/laser
• Band alarms
On (Default)
Off
X Band Turn off to have the detector ignore X band
frequencies.
Turn on for X band sensitivity as follows:
x Highway: Full sensitivity
x City: X band sensitivity reduced
x City 2: X band off
On
Off (Default)
K Band Turn off to have the detector ignore K band
frequencies.
On (Default)
Off
Ka Band Turn off to have the detector ignore Ka band
frequencies.
On (Default)
Off
Laser Turn off to have the detector ignore lasers. On (Default)
Off
K POP Detects K POP transmissions (very brief
transmissions, too fast for some detectors to
hear).
On
Off (Default)
Ka POP Detects Ka POP transmissions (very brief
transmissions, too fast for some detectors to
hear).
On
Off (Default)
K Filter Filters noise from the K band to prevent false
detections.
On
Off (Default)