User's Manual

- 8 -
KEY PRESS TO... PRESS AND HOLD TO...
MARK User Mark. A User Mark is a manually tagged
geographic location where an alarm is usually
found. The R3 alerts when close to these User
Marks.
• Add - Press MARK when you are at the alarm
location.
• Delete - Press MARK when you are at an alarm
location that has been marked (Mute Mem
displays).
An error message displays/sounds if memory is full
or there is a GPS error.
Delete all User Marks.
NON-KEY ELEMENTS
ELEMENT WHAT IT DOES
Eagle Eye Provides a 360° monitoring radius.
Latch Slot
Insert the bracket latch into this slot.
Mini USB Provides PC connection for data updates.
Audio Jack Plug in headset.
Eject Press to release the bracket latch.
Power Jack Plug the 12V Power Cord here.
Signal Strength Displays received signal strength (5 levels).
CHARGER
USB port
MUTE
button
LED
ELEMENT WHAT IT DOES
MUTE button
• Press the mute button to mute an alarm. Returns to normal
operation 10 seconds after the alert ends or if a different band
is detected during Mute mode. Mute On displays on the R3 for a
few seconds.
• Save a Mute location (Mute Memory) - press the mute button
again while Mute On displays on the R3 to save that GPS location
and frequency to memory. Mute Memory displays on the screen.
R3 stores up to 100 Mute Memory points.
• Delete Mute Memory - Press the mute button while Mute
Memory displays on the R3; the R3 displays a delete confirmation
message. Press the mute button again to confirm.
LED (Red) Off: Power is off.
Steady on: Power is on.
Flashing: Receiving an alert. The faster it flashes, the stronger the
signal.
USB Port Use this USB port to charge mobile devices.