User's Manual

- 9 -
LCD DISPLAY
The LCD display on the front of the unit changes depending on what events are happening.
If GPS = Off, the LCD's left display area shows Volt regardless of user settings.
The following table provides examples of the most common displays:
LCD EXAMPLES MEANING
Scanning for Frequencies
mph
42
Hwy
Displays to indicate
end of a scan cycle.

Information displayed:
• Speed (mph or kph)
• Wave
• Heart icon (end of search cycle)
• Highway/City
Frequency Found
Volt
12.8
K 24.120 GHz
Status Area
Information displayed:
• Band type Type (X, K, KA)
• Frequency number
• Voltage
• Status Area (Mute Memory, Quiet Ride, etc)
Speed Camera Alarm
mph
5 8
270 ft
S p e e d
Information displayed:
• Current speed in mph/kpm
• Distance to speed camera
• Speed camera icon
Red Light Camera Alarm
mph
5 8
270 ft
Information displayed:
• Current speed in mph/kpm
• Distance to red light camera
• Red light camera icon
User Mark Detected
mph
5 8
1090 ft
Information Displayed:
• Current speed in mph/kpm
• Distance to user mark
• User mark icon
Time Display (Scan Display Off)
Volt
13.5
Hwy
P
M
11:45
Information displayed
• Voltage
• Time and AM/PM
• Highway/City/City2 setting
Quiet Ride
mph
55
K 24.120 GHz
Q-Ride
Information displayed
• Current speed in mph/kph
• Band type Type (X, K, KA)
• Frequency number
• Status Area (Q-Ride displays)
MENU SYSTEM
Menus let you set up the system to your own requirements. You can turn different bands on and off and set
specific items such as speed or auto mute.