Owner`s manual

4
Setting Up Your BTSC1500
Charge the Battery
Before using your BTSC1500, charge the
battery for at least 3 hours. Charging
the battery completely (and keeping it
charged) will help you get the longest
possible talk and standby time out of the
battery. (On average, the battery provides
about 15 hours of talk time and about 300
hours of standby time.)
Connect an adapter to the power
connector on the back of the BTSC1500
and plug it into any standard; i) 12VDC-
24VDC (DC adaptor), or ii) 240VAC (AC
adaptor) power outlet.
Use ONLY the power adapter supplied with
the BTSC1500! Using any other adapter
could damage your BTSC1500, create a re
hazard, or cause a risk of electric shock!
Inverting the BTSC1500
The BTSC1500 can operate upside down so
you can clip it to either side of your visor.
To reverse the visor clip: press in on the two
tabs that come through the holes in the
clip, and slide the clip out. Rotate the clip
180 degrees and slide it back in.
To invert the display: press & hold
Volume
Up
and Volume Down (at the same time) for 2
seconds.
Pair the Kit to Your Bluetooth Phone
Pairing “introduces” two Bluetooth devices
and gives them permission to connect
to each other. If you want to use the
BTSC1500 with more than one phone, you
BTSC1500om.indd 4 11/11/09 11:27:53 AM