Operating instructions
CALL TOLL FREE 18005009275
37
tools
Skyvision minimum purchase policy is $20.00 plus shipping and handling.
The right tools can make all the difference. See more tools plus satellite
charts, online tech support and FAQ online at www.skyvision.com.
This meter with LCD display
and selectable audio on-off
tone makes it easier than ever
to align multi-feed systems.
Perfect for local signals at 101,
110 and 119 degrees, testing
coax cable runs and checking
receiver voltage output and LNBF
performance. Includes self-contained,
rechargeable battery, AC/DC charger,
dual satellite signal strength measurement and
leatherette case.
ACUTRAC 22 PRO
#9000091 S&H $10 $159.95
audio on/
off tone
LASER FOCAL FINDER
Collect 100% of your signal
for optimum reception by aiming
your feed directly into the center of the dish
with the red laser beam. You will receive the
maximum reflected signal for superior video
and audio. Works with all feed supports except
buttonhook.
LASER FOCAL FINDER
#9000018 S&H $8 $139.95
DISH ALIGNMENT INDICATOR
RECOMMENDED FOR DBS
The easy-to-use SATFinder
Tool is a great way to make
sure you get a perfect signal
without spending a lot.
Signals an audio tone when
dish is perfectly aligned.
Includes a handy earphone
and a built-in tool to loosen
coax fittings. Pocket sized.
SATFINDER TOOL
#9000096 S&H $8 $39.95
MAGNETIC POST LEVEL
The ideal tool for leveling ground
poles, roof mounts, wall mounts,
fence or deck posts. Works with
both square and round posts. This
is the only level that checks plumb
on all sides of the post from one
position.
MAGNETIC POST LEVEL
#9000034 S&H $8 $14.95
DELUXE AIMING TOOL
A great compliment tool for the site
check and aiming your dish.
Features a magnetic base for hands-
free reading, adjustable angle
pointer for marking and transferring
angles and easy-read dial. Works
best when ordered together with
site data and compass.
MAGNETIC POLYCAST® PROTRACTOR AIMING TOOL
#9000010 S&H $8 $17.95
SITE SURVEY TOOL
This handy survey tool
eliminates the guesswork
when it comes to dish
positioning. The built in
compass and clinometer help
determine if the path is clear to
the individual satellites before
you set up your dish. Simple to
use, perfect for DIY jobs or for the
professional.
SATELLITE LOCATOR SURVEY TOOL
#9000111 S&H $8 $169.95
GOOD
ALIGNING YOUR DISH
JUST GOT EASIER!
On the road, camping, tailgating
parties and more—setting up and
aligning a dish just got easier with
this alignment tool. Perfect for any
temporary small dish installation.
Remove the cap with built-in bubble
level to reveal a handy compass.
Azimuth scale markings assist
in getting the job done right the first
time. Simply use the Azimuth and
Elevation angles from the installation menus on your
satellite receiver when hooked to your TV.
SATELLOCK ALIGNMENT TOOL
#9000113 S&H $8 $39.95
COMPASS AND
INCLINOMETER
Compass and inclinometer
in one, with sighting mirror for up
to 1° accuracy. Features rotating
capsule, sight line and adjusting
screw for elevation readings.
Azimuth and quadrant scale.
COMPASS/INCLINOMETER
#9000088 S&H $8 $49.95
BETTER
COMPASS
Water-resistant compass
with Tungsten steel needle
and sapphire-jeweled bearing.
Dial reads in 2° increments.
Temperature range: -40°F
to 140°F.
COMPASS
#9000068 S&H $8 $9.95
WORKS WITH
DBS
PEAK TWO SATELLITES AT ONCE
BEST