Owner`s manual

Turning on the Power

Press and hold [POWER].

NOTE

Low-Voltage/High-Voltage Alert

The UH8080NB can operate on 12VDC (13.8V) or 24VDC (27.6V) power

supply,withtherangebetween10.2VDCto28.8VDC.

Ifthepowersupplyvoltageexceeds28.8VDC,analerttonesoundsand

HI DCashesfor5seconds.Thepowersourcemustnotexceed32VDC

otherwisepermanentdamagemayoccurtoyourradio,whichmaynotbe

covered by the manufacturer’s warranty.

Iftheinputvoltagefallsbelow10.2VDC,LO DCashesfor5seconds.The

power turns off automatically if voltage falls below 9.0VDC.

SwitchyourUH8080NBOFFanddisconnectitfromthepowersource,

before locating the cause of the power supply problem.

Operation

UNIDEN UH8080NB UHF CB Transceiver